Rio Bravo
The Rio Bravo is a two rack unit, ultra-dense audio router and control device.
Description
The Rio Bravo is a two rack unit, high density audio DSP routing engine. Equally comfortable in a broadcast, transmission, conference or live sound environments, the Rio Bravo provides precise audio processing chains for input and outputs, plug and play, card defined hardware offering a physical mixture of up to 96 total analog and AES3 inputs, outputs and mic preamp card.
Audio over IP is standard with Dante/AES67/ST2110.
RioBravo Expansion Options
The RioBravo provides 16 resident (on board) outputs, half analog and half digital intended to drive console related features such as meters and headphones. These can also be used for any other application without a console.
The RioBravo also provides six option module slots for expansion, each slot with the capacity of 16 channels (8 stereo) and can be fitted with input or output modules. The following expansion modules are available in any combination:
- RBMI-8: Adds 8 Microphone Inputs
- RBAI-16: Adds 8 Line Level Stereo Inputs
- RBAO-16: Adds 8 Line Level Stereo Outputs
- RBDI-16: Adds 8 AES Stereo Inputs
- RBDO-16: Adds 8 AES Stereo Outputs
Potential Capacity Increase of 48 Stereo / 96 Mono Channels
- 64×64 Dante Inputs and Outputs, with Primary and Synchronous Secondary backup Networks for ultimate reliaibilty
- SAS Global Connect, Control ANY Engine from anywhere in the world
- 12 channels of “mic strip” processing with compressor/expander, high pass filter, 4 band parametric EQ and AGC with peak limiter
- 6 channels of stereo AGC with 4 band parametric EQ
- 92 Virtual Buss mix channels
- Precise sample rate converters with whole house master clock ability
- Dual redundant Dante RJ45 network ports
- Dual redundant power supply connectors
- Supports SNMP and simple ASCII IP Messaging for complete control
- Independent RJ45 control port, or user configurable to control over Dante LAN
- Can be used as whole facility master audio router or in conjunction with SAS and third party hardware
- Networked by Dante AoIP, AoE (AVB) and AES-67 topologies.
- Dual AoIP ports with built in switch for network redundancy
- Tip, ring sleeve jacks for monitor and cue speakers and Headphones
- Ingest Audio from DAW’s,Playback Automation over IP, drivers included
- TCP/UDP LAN port for Control from Automation
- Fully Integrated Time Based Automation and Show Control
- Integrated Web Browser Interface
- Simple IP Network Setup, no special QoS settings required
- Connect with High Density SAS32KD Networks using AoIP
- Connect to any Dante AoIP devices such as Focusrite, ProTools,Wide Orbit, Aviom, Yamaha, and more
- System backup and configuration saved on Front accessible SD memory Card and file Save.
- Program the SD memory card on any PC for complete offline configuration.
- Build in Silence Detect & Peak Detect
ANALOG LINE INPUT
• Type: Balanced
• Input Level Adjust: -60 to +24dBu in 1dBu steps
• A/D converter: 24 bit over sampling 192K sampling, 4x oversampling
• Input Impedance: 10K ohms
• Dynamic Range [1]: >114dB
• THD+N [2]: < -97dB
Frequency Response:
• @ 48kHz Sample Rate: 20Hz to 20kHz +0.1/-0.5dB
• Connectors: RJ45 SAS Dongle
ANALOG LINE OUTPUT
• Type: Balanced
• Output Level Adjust: -10 to +24dBu in 1dBu steps
• D/A converter: 24 bit over sampling
• Load Impedance: 2K ohms or greater
• Dynamic Range [1]: >114dB
• THD+N [2]: < -100dB
Frequency Response:
• @ 48kHz Sample Rate: 20Hz to 20kHz +0.1/-0.25dB
• Connectors: RJ-45/ SAS Dongle
• Type AES/EBU (EIAJ CP-340 Type I / IEC-958 Professional)
• Input/Output Impedance 110 ohms
• Connector RJ45 SAS Dongle
• VHDCI Sample Rates 32, 44.1, 48kHz with sample rate converters on inputs
SAMPLE RATE CLOCK
• Internal (Adapter) 44.1, 48kHz
• Type: 100/1000Mb Ethernet
• Connector: Dual RJ-45 Primary and Synchronous Secondary backup Networks for ultimate reliability
• Audio formats: 16, 24 and 32 bits per sample
• Sample Rate: 44.1kHz, 48kHz
- Radio Broadcast Distribution and Control Room and Studios
- TV Audio Broadcasting Studios, Intercom and IFB
- Live Sound, stage
- Airports, Intercom and Paging Systems
- Assembly Chambers, House, City Council etc. with Full Control House Speaker and Dais Control with Auto Voting
- Schools, Colleges, University Sound Systems and Intercom
- Automatic Mix Minus Functions for Every Source
- Natively AES-67 AoIP and Dante
- Connect to Any AES-67 and Dante Enabled Devices, used by manufacturers such as Yamaha, Behringer, Panasonic, Evertz, RTS, Focusrite, Leitch Video
- Supports SNMP and published simple ASCII IP Messaging for complete control
- Remote Console/Virtual Console Applications are available from SAS and other 3rd party Vendors
- Supports SNMP and simple ASCII IP Messaging for complete control
Broadcast Studio Application
Parametric EQ
Comp FX
