The Rio Bravo is a two rack unit, high density audio router.
The Rio Bravo is a two rack unit, high density audio router. Equally comfortable in a broadcast, transmission, conference or live sound environments, the Rio Bravo provides precise audio processing chains for input and outputs, plug and play, card defined hardware offering a physical mixture of up to 96 total analog and AES3 inputs, outputs and mic preamp card. Audio over IP is standard with SMPTE 2010 and Dante/AES67 input and output options, GPIO, virtual control and external control for SAS and a number of third party devices.
• Type: 100/1000Mb Ethernet
• Connector: Dual RJ-45 Primary and Synchronous Secondary backup Networks for ultimate reliability
• Audio formats: 16, 24 and 32 bits per sample
• Sample Rate: 48kHz, 96kHz
ANALOG LINE INPUT
• Type: Balanced
• Input Level: -60 to +24dBu in 1dBu steps
• A/D converter: 24 bit over sampling 192K sampling, 4x oversampling
• Input Impedance: 10K ohms
• Dynamic Range [1]: >114dB
• THD+N [2]: < -97dB
Frequency Response:
• @ 48kHz Sample Rate: 20Hz to 20kHz +0.1/-0.5dB
• @ 96kHz Sample Rate: 20Hz to 40kHz +0.1/-2.0dB
• Connectors: RJ45 SAS Dongle
ANALOG LINE OUTPUT
• Type: Balanced
• Output Level: -10 to +24dBu in 1dBu steps
• D/A converter: 24 bit over sampling
• Load Impedance: 2K ohms or greater
• Dynamic Range [1]: >114dB
• THD+N [2]: < -100dB
Frequency Response:
• @ 48kHz Sample Rate: 20Hz to 20kHz +0.1/-0.25dB
• @ 96kHz Sample Rate: 20Hz to 40kHz +0.1/-3.0dB
• Connectors: RJ-45/ SAS Dongle
• Type AES/EBU (EIAJ CP-340 Type I / IEC-958 Professional)
• Input/Output Impedance 110 ohms
• Connector RJ45 SAS Dongle
• VHDCI Sample Rates 32, 44.1, 48, 88.2, 96kHz with sample rate converters on inputs
SAMPLE RATE CLOCK
• Internal (Adapter) 32, 44.1, 48, 88.2, 96kHz
LOCAL, VIRTUAL AND CLOUD BASED ROUTING WORLDWIDE
We celebrate the long-term success of our customers, one input and one output at a time!